Marasst Incorporation 03010 사용자 설명서
6
Setting Up the Tripod
Attaching the Camera to the Tripod
1. Hold the camera firmly to avoid dropping it.
2. Screw the threaded top of the assembled angle bracket clockwise
2. Screw the threaded top of the assembled angle bracket clockwise
into the hole on the underside of the camera body.
Positioning the Tripod
The camera tripod is equipped with adjustable legs to allow positioning
of the camera at a range of heights. Each of the three legs is individually
adjustable to allow compensation for uneven surfaces. The camera
mount angle bracket at the top of the tripod can be adjusted to a suitable
angle by loosening the angle bracket screw, setting the angle, and then
tightening the screw.
of the camera at a range of heights. Each of the three legs is individually
adjustable to allow compensation for uneven surfaces. The camera
mount angle bracket at the top of the tripod can be adjusted to a suitable
angle by loosening the angle bracket screw, setting the angle, and then
tightening the screw.
Angle bracket
screw
Adjustable leg
Marasst.book Page 6 Thursday, June 19, 2003 6:05 PM