Marasst Incorporation 03010 사용자 설명서
10
To mount the camera to a fixed surface:
1. Make sure the mounting assembly components are screwed
together firmly.
2. Hold the base of the mount against the fixed surface and point the
camera at the area to be monitored.
3. Have another person test reception of the video monitor/receiver in
locations where you plan to use the receiver. See the section
“Adjusting Reception Quality” on page 25 for information on improving wireless transmission quality. Determine the optimum
camera placement before proceeding to the next step.
“Adjusting Reception Quality” on page 25 for information on improving wireless transmission quality. Determine the optimum
camera placement before proceeding to the next step.
4. Using a sharpened pencil, mark the location of the three mounting
bracket holes on the fixed surface (e.g. wall).
5. Drill three holes at the locations you marked.
6. Push the wall plugs into the holes.
7. Use a Phillips screwdriver to screw the base mount to the fixed
6. Push the wall plugs into the holes.
7. Use a Phillips screwdriver to screw the base mount to the fixed
surface.
8. Attach the camera to the angle bracket and make final adjustments
to the camera angle. Tighten the angle bracket thumb screw as
shown below.
shown below.
Angle bracket thumb screw
Marasst.book Page 10 Thursday, June 19, 2003 6:05 PM