Linksys WAP54G v3.1 사용자 설명서

36

Chapter 7: Configuring the Wireless-G Access Point

The Access Point has been designed to be functional right out of the box, with the default settings in the Setup 
Wizard. However, if you'd like to change these settings, the Access Point can be configured through your web 
browser with the Web-based Utility. This chapter explains how to use the Utility.

The Utility can be accessed via Microsoft Internet Explorer or Netscape Navigator through use of a computer that 
is networked with the Access Point.

For a basic network setup, most users only have to use the following screens of the Utility:

•

Setup
On the Network Setup screen, enter your basic network settings here.

•

Management
Click the Administration tab and then select the Management screen. The Access Point’s default password 
is admin. To secure the Access Point, change the AP’s Password from its default.

There are four main tabs: Setup, Wireless, Administration, and Status. Additional screens will be available from 
most of the main tabs.

Setup

Enter the network and AP mode settings for the Access Point.

•

Network Setup. Enter the settings for the Access Point and your Internet connection on this screen.

•

AP Mode. Set up how the Access Point will work with other access points in your network.

HAVE YOU: Enabled TCP/IP on your PCs? PCs 
communicate over the network with this 
protocol. Refer to “Appendix D: Windows Help” 
for more information on TCP/IP.

NOTE: The Access Point is designed to 
function properly after using the Setup Wizard. 
This chapter is provided solely for those who 
wish to perform more advanced configuration 
or monitoring.