Linksys WIP310 사용자 설명서
Wireless-G IP Phone
9
Chapter 3: Installing and Using the Wireless-G IP Phone
Setting up the Wireless-G IP Phone
Setting up the Wireless-G IP Phone
Setting up the Wireless-G IP Phone
Before you begin, make sure you have an active Internet connection and your SIP account information provided
by your Internet phone service provider.
by your Internet phone service provider.
1. Press the Power (receiver button on right-hand side) button to turn on the Phone.
2. You may need to enter your password. Use the keypad to enter the password (default password is USER).
3. When you are finished entering a password, press the Navigation button to save it.
4. If you do not need to enter a password, then press the Menu Soft Key.
5. Scroll to Profile and press the Select Soft Key to enter the profile configuration menu.
Note: The Phone automatically dims and turns off the LCD display when the Phone is not in
use. If this happens while you are configuring the Phone, press any key to turn the display
back on and continue configuring the Phone.
use. If this happens while you are configuring the Phone, press any key to turn the display
back on and continue configuring the Phone.
Figure 3-1: Enter
Phone Password
Figure 3-2: Profile
menu