Mobilicom ltd. MCU-30 사용자 설명서
MCU-30 User Manual
Page : 19 / 51
This page contains information which is protected by copyright and is proprietary to Mobilicom Ltd.
No part of this document
may be used, copied, disclosed or conveyed to another party without prior written consent of Mobilicom Ltd
5 Mechanical Specifications
The MCU-30 has various packaging options enabling a wide range of applications
and installation scenarios.
and installation scenarios.
The most common packaging option is the outdoor unit with rugged casing, designed
for harsh environment conditions and flight ready.
for harsh environment conditions and flight ready.
An extended ruggedized environmental casing should be used for extreme
environmental conditions and is available for ordering.
environmental conditions and is available for ordering.
There is an option for an embedded package (electronic boards only) which does not
include any casing. It is commonly used for embedding the unit as OEM into systems
such as UAVs, robots and other applications. In such cases, the customer/partner is
responsible for the mechanical casing and mechanical design considerations such as
cooling, (heat sink), sealing etc.
include any casing. It is commonly used for embedding the unit as OEM into systems
such as UAVs, robots and other applications. In such cases, the customer/partner is
responsible for the mechanical casing and mechanical design considerations such as
cooling, (heat sink), sealing etc.
The following table shows the MCU-30 mechanical details for various packages
types.
types.
Dimensions
[HxWxD] cm
[HxWxD] inch
Weight (g)
Weight (Oz)
Embedded Package
7.4 x 8.0 x 2.7 cm
2.9 x 3.15 x 1.1
”
140 gr.
4.94 oz.
Ruggedized
12 x 9 x 6 cm
4.7 x 3.5 x 2.3”
550 gr.
19.5 oz.
Extended Rugged
12 x 9 x 6 cm
4.7 x 3.5 x 2.
3”
550 gr.
19.5 oz.
Table 2:
MCU-30 Mechanical Specifications
6 Technical Specifications
6.1 Radio and Modem Specifications
6.1.1 Frequency bands available with the MCU-30:
700-950MHz
2.3-2.7GHz
2.4GHz unlicensed band
4.9-5.9GHz (including all the unlicensed bands).
Additionally, there is an option for a multiband radio including 2 different bands within
the same MCU unit. The MCU-30 family is hardware ready to support any frequency
between 70MHz and 6GHz upon specific demand submitted by the customer.
the same MCU unit. The MCU-30 family is hardware ready to support any frequency
between 70MHz and 6GHz upon specific demand submitted by the customer.
6.1.2 Antennas
Various standard antennas Dipole, 2dBi maximum gain, Omni with SMA/M connector
can be supported.
can be supported.