Mobilicom ltd. MCU-30L 사용자 설명서
MCU-30 User Manual
Page : 16 / 51
This page contains information which is protected by copyright and is proprietary to Mobilicom Ltd.
No part of this document
may be used, copied, disclosed or conveyed to another party without prior written consent of Mobilicom Ltd
4.2 Rear View Connectors
Main:
MCU-30: A HR22-12WTRA-20P connector is used.
MCU-30 Lite: A Molex P/N: 5015715007 connector is used.
The data connectors include 10/100Mbps ETHERNET port and can in additional
support Serial RS-232 port.
support Serial RS-232 port.
Power:
MCU-30: A LF10WBRB-4P connector is used.
MCU-30 Lite: A Molex P/N: 5023520600 connector is used.
The power connecters utilizing 7-14.5VDC. The connector includes Dual Inputs for Hot
Swap during operation.
Swap during operation.
CAUTION – Connecting two batteries in parallel for a long period might
cause common discharge. For hot swap connect the second battery and
disconnect the first one after.
cause common discharge. For hot swap connect the second battery and
disconnect the first one after.
CAUTION – When an MCU-30 is carried by a personnel, environment
temperature should not exceed 45°C (113°F)
temperature should not exceed 45°C (113°F)
NOTE –Information about the connectors pin assignment is available in
Appendix C – Connectors Pinout
Appendix C – Connectors Pinout
LED: The MCU-30 LED indicates power up and link status