Hewlett Packard Enterprise Company APIN0304305 사용자 설명서

ARUBA 300 SERIES ACCESS POINTS

 

The Aruba 300 Series APs can be conigured to provide 

part-time or dedicated air monitoring for spectrum analysis 

and wireless intrusion protection, VPN tunnels to extend 

remote locations to corporate resources, and wireless mesh 

connections where Ethernet drops are not available.

• Intelligent app visibility and control

 

AppRF technology leverages deep packet inspection to 

classify and block, prioritize or limit bandwidth for over 

2,500 enterprise apps or groups of apps.

• Security

 

Integrated wireless intrusion protection ofers threat 
protection and mitigation, and eliminates the need for 

separate RF sensors and security appliances.

 

IP reputation and security services identify, classify, 

and block malicious iles, URLs and IPs, providing 
comprehensive protection against advanced online threats.

 

Integrated Trusted Platform Module (TPM) for secure 

storage of credentials and keys.

• Intelligent Power Monitoring (IPM):

 

Enables the AP to continuously monitor and report 

its actual power consumption and optionally make 

autonomous decisions to disable certain capabilities.

 

For the 300 Series APs, the IPM power-save feature applies 

when the unit is powered by an 802.3af PoE source. By 
default, the USB interface will be the irst feature to turn 
of if AP power consumption exceeds the available power 
budget. In rare cases it may be necessary to take additional 

power saving measures, but in most cases, the 300 Series 

APs will operate in unrestricted mode.

Aruba 300 Series APs ofer a choice of operating modes to 
meet your unique management and deployment requirements.

• Controller-managed mode – When managed by 

Aruba Mobility Controllers, Aruba 300 Series APs 
ofer centralized coniguration, data encryption, policy 
enforcement and network services, as well as distributed 
and centralized traic forwarding. 

• Aruba Instant mode – In Aruba Instant mode, a single 

AP automatically distributes the network coniguration 
to other Instant APs in the WLAN. Simply power-up one 
Instant AP, conigure it over the air, and plug in the other 
APs – the entire process takes about ive minutes. If WLAN 
requirements change, a built-in migration path allows 

300 Series Instant APs to become part of a WLAN that is 

managed by a Mobility Controller.

• Remote AP (RAP) for branch deployments.
• Air monitor (AM) for wireless IDS, rogue detection  

and containment.

• Spectrum analyzer, dedicated or hybrid, for identifying 

sources of RF interference.

• Secure enterprise mesh.

For large installations across multiple sites, the Aruba Activate 
service signiicantly reduces deployment time by automating 
device provisioning, irmware upgrades, and inventory 
management. With Aruba Activate, Instant APs are factory-
shipped to any site and conigure themselves when powered up.

• AP-304 (controller-managed) and IAP-304 (Instant):

 

802.11ac – 5GHz 3x3 MIMO (1,300 Mbps max rate) and 

2.4GHz 2x2 MIMO (400 Mbps max rate) radios, with  

a total of three dual-band RP-SMA connectors for 

external antennas

• AP-305 (controller-managed) and IAP-305 (Instant):

 

802.11ac – 5GHz 3x3 MIMO (1,300 Mbps max rate) and 

2.4GHz 2x2 MIMO (400 Mbps max rate) radios, with a 

total of three integrated omni-directional downtilt dual-

band antennas

• AP type: Indoor, dual radio, 5GHz 802.11ac 3x3 MIMO and 

2.4GHz 802.11n 2x2 MIMO

• Software-conigurable dual radio supports 5GHz (Radio 0) 

and 2.4GHz (Radio 1)

• 5GHz: Three spatial stream Single User (SU) MIMO for up 

to 1,300 Mbps wireless data rate to individual 3x3 VHT80 

client devices

• 5GHz: Two spatial stream Multi User (MU) MIMO for up  

to 867 Mbps wireless data rate to up to two (1x1 VHT80) 

MU-MIMO capable client devices simultaneously

• 2.4GHz: Two spatial stream Single User (SU) MIMO for up 

to 400 Mbps wireless data rate to individual 2x2 VHT40 

client devices (300 Mbps for HT40 802.11n client devices)

• Support for up to 255 associated client devices per radio, 

and up to 16 BSSIDs per radio

• Supported frequency bands (country-speciic  

restrictions apply):

 

2.400 to 2.4835GHz

 

5.150 to 5.250GHz

 

5.250 to 5.350GHz

 

5.470 to 5.725GHz

 

5.725 to 5.850GHz