SendFar Technology Co. Ltd. OAP-02002 사용자 설명서

22

Access Interface: Indicate the translation occurs on which interface
(Wireless interface / Ethernet interface), such as Ethernet.

Protocol: Indicate which protocol (TCP/UDP) you want to translate
from outside to internal server, such as TCP.

Public Access Port number: Indicate which socket port (1 ~ 65535)
you want to translate from outside to internal server, such as 21.

Virtual Server IP address: Specify the private IP address of the
internal server, such as 192.168.1.100.

Virtual Server Port number: Specify the socket port (1 ~ 65535) of the
internal server, such as 21.

3. Click 

 OK . The Virtual Server Entry Table appears with the entries list.

4.  To modify or delete a virtual server entry, click the select button beside

the entry index number and click  Modify  or  Delete .

5.  To add another entry to the Virtual Server Mapping Pool, repeat step 1

through step 3.

6.  When you have included all the entries you need, click  FINISH .  

23

Sometimes, the operator want to managing a large TCP/IP network
requires maintaining accurate and up-to-date IP address and domain name
information. In this situation, it needs manually configure and enable the
DHCP server service. Select the

and then the

General Configuration – DHCP Parameter screen appears.  Figure 4-5
shows the general DHCP parameters and the fixed host entry table.
(Default fixed host entry pool is empty).