SendFar Technology Co. Ltd. WPC-03003 사용자 설명서
Version 1.00
9
Figure 2-6
4. Click
the
Properties button, then check the message. This device is
working properly is displayed for Device status.
5. If you find the Yellow (?) sign on the adapter or the above message is
not displayed, it shows the installation is not successful or the wireless
LAN PC Card is not operating properly. Uninstall and re-install the
driver, referring to Chapter 2-5 Uninstalling Driver and Utility.
LAN PC Card is not operating properly. Uninstall and re-install the
driver, referring to Chapter 2-5 Uninstalling Driver and Utility.
2.3 Installation for Windows 98SE/ME/2000
Installation for Windows 98SE/ME/2000 are all the same with Installation
for Windows XP. Before plug WPC-3110 into the PCMCIA slot, you must
install the driver and utility at first. So please refer the Windows XP
installation procedures to install the driver and utility for your PC or
Notebook which installed with Windows 98SE/ME/2000.
Version 1.00
10
2.4 Wireless LAN Client Utility
The wireless LAN Configuration Utility appears as an icon on the system
tray of Windows while the card is running.
The icon is appeared as bar diagram with different color and level for
representing different connection status. While the station is not associated
with other STA/AP, the icon will appear as an empty bar diagram. Once it is
associated, it will appear as different color for different level of signal
strength. There are 3 levels of icons to represent the signal strength, the
green one (signal strength from 100%~50%), the yellow one (50%~25%),
and the red one (below 25%).
The Wireless LAN Configuration Utility is a highly integrated application
include the following main options.
Status
Site Survey
Statistics
About
Figure 2-7