Controlled Electronic Management Systems Ltd INFOPROX 사용자 설명서

InfoProx Entry   

Card Management 

 

1. 

Press 1 from the Administration menu to access the Add Card option. 

The following prompt appears: 

 

0-By Swipe 
1-By Keypad 

This screen allows a card to be added to the database. 

2. 

Press 1 to access the add a card from the keypad option, as shown in 
above.  

The following prompt appears: 

 

I/P NUM XXXXXXXX 
HStmp= 

Using the keypad of a unit, a card can be added to the database by 
entering the card system number. 

3. 

Enter a hotstamp number. If the hotstamp number is fewer than eight 
digits in length, then the number must be preceded with zeros (0) 

Once a hotstamp number is entered, the following prompt appears: 

 

I/P NUM XXXXXXXX 
Sys No= 

4. 

Enter the embedded system number. The system card number must 
be entered in decimal format. If the system card number contains 
fewer than eight digits, the number entered must be preceded with zeros 
(0). 

 

Either the embedded system number is the same as 
the hotstamp number or the manufacturer provides 
the system number. If you do not have a system 
number, use the hotstamp number preceded with the 
appropriate number of 0s. The system number will 
be associated with the hotstamp number entered 
when the card is presented to the reader. To find the 
system number, once a card is added, go to 2-Find 
and follow directions for a search. 

When the card system number is successfully added, the following 
prompt appears, allowing a PIN to be assigned to the new card. 

 

PIN ? 
1-Yes, Other-No 

If you do not want to assign a PIN, then press # or any other key to 
bypass the next step.