Fuzhou Smart Digital Science & Technology Co. Ltd. MW0712 사용자 설명서

 

- 8 - 

  

Press and hold the Power button for a few seconds. After the boot screen is shown (for about 40 

seconds), the unlock interface is shown. Touch and hold the unlock icon at the middle right of the 

screen and drag it rightward to the “open lock” icon to unlock it. Once unlocked, the main Interface 

will be shown. 

Note: Touch and hold the unlock icon at the middle right of the screen and drag it leftward to the 

Camera icon to enter directly into camera mode. 

  

In any mode, Press and hold the Power button for about 2 seconds. The device shutdown window 

will appear: Touch “OK” to turn off the product. 

Note 1: If the battery is low, the product will shutdown automatically. 

Note 2: If the product freezes during operation, press and hold the Power button for 8 seconds to 

force shutdown. 

  

To surf the Internet wirelessly, make sure the Wi-Fi wireless network signals are present and set 

the Wi-Fi network connection. There are two ways of going to the “Wireless & Networks” settings 

interface: 

a. Touch the notification icon at the bottom right corner of the main interface, touch the popup 

window and touch “Wi-Fi”. 

b. In the “Apps” interface, touch “settings” icon to go to the settings interface, and then touch “Wi 

-Fi”.

 

 

Note: For detailed settings, refer to “9.1 Wireless & Network Settings”.   

Standby: During use, you can press the power button to enter into standby mode to save battery 

power and lock the key and screen.   

Wake up: When the device is in standby mode, press the Power button. After the screen lights up, 

touch and slide the “Lock” icon to the right towards to the “unlocked” icon. 

  

If the product crashes during operation, you can press and hold the Power button for 8 seconds to