Redline Communications Inc. SUIIRM 사용자 설명서
Red
MAX
™
Subscriber Modem
SU-I User Manual
70-00078-01-02-DRAFT
Proprietary Redline Communications © 2008
May 12, 2008
Page 20 of 50
3.3
Indoor Subscriber Connections and Controls
All external connectors and controls are located on the bottom of the subscriber unit.
Refer to the following sections for details.
Refer to the following sections for details.
Figure 7: Subscriber System Connections - Power Connector
3.3.1 Ethernet
Port
The auto-sensing 10/100Base-T Ethernet port connects through the Ethernet cable to the
customer network equipment. The subscriber exchanges data with the network through
this port (auto-sensing polarity). It is recommended to use a flexible Ethernet cable.
customer network equipment. The subscriber exchanges data with the network through
this port (auto-sensing polarity). It is recommended to use a flexible Ethernet cable.
Figure 8: Subscriber Ethernet Connector (Under Base)
3.3.2 Reset
Switch
The subscriber features a reset switch recessed in the bottom of the subscriber unit. You
may require a narrow pointed item (ex. paper clip) to activate the reset switch.
may require a narrow pointed item (ex. paper clip) to activate the reset switch.
Figure 9: Subscriber Reset Switch (Under Base)