D.O.Tel Co. Ltd. DOT400 사용자 설명서

 

DOT400 User Guide  -

18

 - 

Connecting to Your Desktop PC Using the 
USB Sync Cable or Docking Cradle

 

Connect your DOT 400 to a desktop PC using the USB sync cable or 
docking cradle. USB Driver will be installed automatically. Then, The 
synchronization between your device and the desktop PC will start 
after establishing a partnership. The following table shows the 
available communication devices (USB, serial, infrared) according to 
Operating Systems. 

Operating Systems supported 

Desktop PC Operating System 

Connection 
Method 

Windows 95 

Windows 98 

Windows 2000 

Windows NT

   

USB 

No

 

Yes

 

Yes

 

No

 

Serial

 

Yes

 

Yes

 

Yes

 

Yes

 

Infrared

 

Yes

 

Yes

 

Yes

 

No

 

 

Follow the procedures below to connect between the desktop PC and 
DOT 400 using the USB sync cable: 

1.  Connect the USB sync cable to the USB port of the desktop PC. 

2. 

Connect the 24-pin connector of the other end to DOT 400.

 

 

Follow the procedures below to connect between the desktop PC and 
DOT 400 using the docking cradle: 
1.  Connect the DC plug from the battery charger to the DC jack on 

the cradle, and plug the battery charger into an electrical outlet. 

2.  Connect the USB cable from the cradle to a USB port on your 

desktop PC. 

3.  Slide your DOT 400 into the cradle. The connection program of 

DOT 400 and Microsoft ActiveSync of the desktop PC will start 
automatically for their connection, 

4.  USB driver will be installed automatically, Otherwise You should 

install USB driver manually referring to Install USB driver Part. 

5. The New Partnership Wizard will appear on your desktop PC 

to help you set up a partnership. The set up method is explained