Airaya Corp GRID-3X3-PS 사용자 설명서
- 20 -
Airaya
WirelessGRID-300 Backhaul
WirelessGRID-300 System Setup Tab
The WirelessGRID-300 System Setup screen is used to add or delete
remote Bridge MAC addresses from the authorized bridge list. Each
bridge contains a WirelessGRID-300 authorization list, and all bridges
require reciprocal entries to communicate.
remote Bridge MAC addresses from the authorized bridge list. Each
bridge contains a WirelessGRID-300 authorization list, and all bridges
require reciprocal entries to communicate.
The Add New Bridge to WirelessGRID-300 section of the screen contains the
following entries:
Quick Add Instructions – Step-by-step instructions to set up and add a
new bridge to a WirelessGRID-300 network
new bridge to a WirelessGRID-300 network
Bridge MAC Address – The MAC address of a remote bridge you want
authorized to connect to the bridge you are working with. You must enter
this information in the proper format. Backhaul/Point-point bridges and
subscriber units can accept 1 entry.
authorized to connect to the bridge you are working with. You must enter
this information in the proper format. Backhaul/Point-point bridges and
subscriber units can accept 1 entry.
Location Identifier –This feature is not enabled at this time.