Airaya Corp GRID-C 사용자 설명서
Airaya
– Fast and affordable outdoor wireless bridges
Installing and Visually Aligning Outdoor Units
To ensure maximum performance and stability of your wireless link, it is
crucial that you determine the right locations for the outdoor
units/antennas based on the following criteria:
•
A good signal path, ideally with visual line of sight and
adequate Fresnel clearance between bridges
adequate Fresnel clearance between bridges
•
Minimal distance between bridges
•
Minimal reflections from other objects.
Figure 6. If using 23 dBi
directional antennas supplied by
AIRAYA, pole mast mounting of
the external antennas can be
accomplished using the included
mounting brackets with full
vertical and horizontal
adjustment.
directional antennas supplied by
AIRAYA, pole mast mounting of
the external antennas can be
accomplished using the included
mounting brackets with full
vertical and horizontal
adjustment.
Follow these steps to install and visually align outdoor units/antennas:
1. Attach the outdoor unit/antenna to a mast using the included pole-
1. Attach the outdoor unit/antenna to a mast using the included pole-
mount bracket.
2. Align the antenna horizontally: Loosen the horizontal adjustment bolt
and nut to visually aim the outdoor unit/antenna at the remote bridge.
Set the appropriate horizontal angle and tighten the horizontal
adjustment bolt and nut so that the angle is locked in place.
Set the appropriate horizontal angle and tighten the horizontal
adjustment bolt and nut so that the angle is locked in place.
3. Align the outdoor enclosure/antenna vertically: Loosen the vertical
adjustment bolt and nut on the mounting bracket and point the
antenna towards the remote end point. Set the appropriate elevation
angle and tighten the alignment bolts so that the angle is locked in
place.
antenna towards the remote end point. Set the appropriate elevation
angle and tighten the alignment bolts so that the angle is locked in
place.
- 15 -