Airo Wireless LLC ISAFE28 사용자 설명서
Airo Wireless I-Safe™ 28
User Guide
(AW-UG-051013)
9
PHONE & MEMORY SETUP
Before charging or using your handset, you may want to install a SIM card to allow the handset to connect to a
mobile telephone network and make phone calls. You may also want to install a 2 Gigabyte microSD card to
increase the amount of the memory available on the device. A SIM card from a network operator that operates
a GSM network will allow phone calls and data transport around the world. This handset will not operate on
CDMA networks.
mobile telephone network and make phone calls. You may also want to install a 2 Gigabyte microSD card to
increase the amount of the memory available on the device. A SIM card from a network operator that operates
a GSM network will allow phone calls and data transport around the world. This handset will not operate on
CDMA networks.
Insert the SIM Card & optional Micro SD Card
1. Turn the handset over, and fully loosen the four battery cover
screws by turning them counter-clockwise with the special
Airo screwdriver supplied with your handset. (The screws are
designed to stay in the cover when loose.)
Airo screwdriver supplied with your handset. (The screws are
designed to stay in the cover when loose.)
2. Detach the battery cover from your handset.
3. Holding the phone with your left hand, open the SIM cage by inserting
your thumbnail or Airo screwdriver into the slot and carefully pushing
away from you, until you hear and feel the cage door “pop,” then
carefully lift the edge.
away from you, until you hear and feel the cage door “pop,” then
carefully lift the edge.
4. If you have a MicroSD memory card, open the SD cage by inserting
your thumbnail or Airo screwdriver into the slot and pushing to the
right lightly until you until you hear and feel the cage door “pop,” then
lift the edge. If you do not have an SD card, skip to step #6 on the next
page.
right lightly until you until you hear and feel the cage door “pop,” then
lift the edge. If you do not have an SD card, skip to step #6 on the next
page.