Microsoft Corporation RM-158 사용자 설명서

option is active (

). 

 affects all 

calls, including data calls.

Call barring and call diverting cannot be active at the 
same time.

When calls are barred, calls still may be possible to certain 
official emergency numbers.

Your device can automatically switch between the GSM 
and UMTS networks. The GSM network is indicated with 

 in the standby mode. The UMTS network is indicated 

with .

 (shown only if supported by the 

operator)—Select which network to use. If you select 

, the device uses the GSM or UMTS network 

automatically, according to the network parameters and 
the roaming agreements between the network operators. 
Contact your network operator for more details.

—Select 

 to set the device 

to search for and select one of the available networks, or 

 to manually select the network from a list of 

networks. If the connection to the manually selected 
network is lost, the device sounds an error tone and asks 
you to reselect a network. The selected network must have 
a roaming agreement with your home network, that is, the 
operator whose SIM card is in your device.

 Glossary: A roaming agreement is an agreement 

between two or more network service providers to 
enable the users of one service provider to use the 
services of other service providers.

—Select 

 to set the device to indicate 

when it is used in a cellular network based on microcellular 
network (MCN) technology and to activate cell info 
reception.

Indicators shown in the standby mode: 

—A headset is connected. 
—The headset is unavailable, or a Bluetooth connection 

to a headset is lost.

Select 

 or 

 and the following 

options are available:

—To set the profile that you want activated 

each time you connect a certain enhancement to your 
device. See ‘Profiles—Set tones’, p. 21. 

—To set the device to answer an 

incoming call automatically after 5 seconds. If the Ringing 
type is set to 

 or 

, automatic answer is 

disabled.