Agrident Corporation AWR100 사용자 설명서

08/10/2007 

Vertraulich / Confidential 

Page 15 of 31 

 

 

 

 

On the first line of the LCD display the current software version of the Stick Reader appears: 
 
 
 
 
 

On the second line of the LCD display the current date and time is displayed first: 
 
 
 
 
 
If the time does not correspond with the current time, the real time clock has to be synchronised 
(see chapter 5.1.1). 
 

Now the status of the battery is displayed in the second line of the LCD display. The status of 
the battery is not an absolute value. 
 
 
 
 
 
 
The amount of displayed points is an information about the status of the battery. One point up to 
six points are possible. If only one point is displayed, the battery is almost empty. This informa-
tion means, that the battery should be replaced soon or has to be recharged. 
 

Now the number of read transponders is displayed: 
 
 
      
 
 
The first number represents the animal counter of the current group (in this example 5). The 
second number represents the sum of all stored datasets including group separators (in this 
example 138). The last number represents the amount of datasets which can be stored on the 
Stick Reader (5000). 
Hind!!!  

5000 datasets are possible. If 5000 transponders and separators were stored, the 
datasets must be cleared before new transponders can be read. 
 

If 5000 datasets already stored, and a new transponder is read, the following information ap-
pears on the LCD display: 
 
     
 
 
 
 
Any transponder number, which is read after this message appeared, will not be stored. Before 
the work can be continued, the dataset has to be downloaded to the computer and to be 
cleared on the AWR100 afterwards. 
 
 
 
 
 

 

5/ 138/5000