Corinex Communication Corp. POWERNET-USB 사용자 설명서
8. After restart (in Windows 20000/XP immediately, after step 8)
will be automatically run “PowerNet Setup Tool”. Refer to section
3.1 for details. This prevents anyone from intercepting your
transmitted data.
3.1 for details. This prevents anyone from intercepting your
transmitted data.
9. It is neccessary to configure network settings for your new
networking hardware. Refer to your operating system manual
for instructions to setup required parameters such as IP adddress
and subnet mask; or ask your system administrator for required
informations.
for instructions to setup required parameters such as IP adddress
and subnet mask; or ask your system administrator for required
informations.
2.4 Testing the Setup
To verify that connection is working correctly, use the standard Ping
utility.
utility.
(in Windows, click to menu Start->Run, the write command
“ping IPADDRESS –t”, where IPADDRESS is IP address of computer
the USB adapter is connected to, e.g. “ping 192.168.4.1 –t”. This
command will be stopped by pressing CTRL+C).
the USB adapter is connected to, e.g. “ping 192.168.4.1 –t”. This
command will be stopped by pressing CTRL+C).
• Ping the IP address of the computer the USB adapter is
connected to.
• Repeat the same process with the other power line device on
the network.
• If all nodes can ping themselves, try pinging another power
line device on the network. If this fails, there is a problem with
connections on the power line. Try a different AC outlet.
connections on the power line. Try a different AC outlet.
• If the setup does not work, refer to the troubleshooting guide,
but first, try unplugging the powerline device and reboot the
computer as this sometimes fixes the problem.
computer as this sometimes fixes the problem.
3
8