PNI Corporation IFS-11423 사용자 설명서
14
The SENSORO ALPHA/ALPHA+ will not power up.
• Make sure the
• Make sure the
VOLUME/OFF
thumb wheel is turned on.
• Check all power cord connections.
• Check fuse in lighter socket adapter and replace if
• Check fuse in lighter socket adapter and replace if
necessary.
• Check lighter socket. Clean if dirty.
• Check your vehicle’s fuse panel (refer to your vehicle’s
• Check your vehicle’s fuse panel (refer to your vehicle’s
manual).
When calibrating the compass, the SENSORO ALPHA/
ALPHA+ displays “CALIBRATION COMPLETED” instead of
“TURN TWICE.”
• You are holding the
• You are holding the
Calibration
button for longer than
three seconds in step one of the calibration instructions.
(See Calibrating the unit.) Make sure you release the
Calibration
button immediately when you hear the unit
beep.
The SENSORO ALPHA/ALPHA+ did not alert when passing
an officer.
• Not all police cars have radar/laser, or it may not be in use
• Not all police cars have radar/laser, or it may not be in use
at that time.
TROUBLESHOOTING