HIMS International Corporation B14K 사용자 설명서
1.2.3 The Rear Panel
The rear panel contains 2 items. On the left is the "Reset" button. Press
this dot-like button to reset the Smart Beetle if it behaves in an
unexpected manner or becomes unresponsive.
this dot-like button to reset the Smart Beetle if it behaves in an
unexpected manner or becomes unresponsive.
On the right is a small rectangular Micro USB port for connecting the AC
adapter or for connecting the Smart Beetle to a computer.
adapter or for connecting the Smart Beetle to a computer.
1.2.4 The Bottom Face
The underside of the Smart Beetle contains 4 rubber feet on each of the
corners to prevent slippage when in use. It also contains a small round
speaker near the left for outputting system sounds.
corners to prevent slippage when in use. It also contains a small round
speaker near the left for outputting system sounds.
2. Basic Functions
This chapter explores the basic functions of the Smart Beetle including
powering on and off, charging and checking power status, resetting and
checking the LED display.
powering on and off, charging and checking power status, resetting and
checking the LED display.
2.1 Powering On and Off
To power on Smart Beetle, hold the "Power" button for at least 1 second.
The Power On sound is heard, and "Power On" is displayed on the
Braille display. When the Smart Beetle has finished booting, "Pairing
BRL" is displayed.
The Power On sound is heard, and "Power On" is displayed on the
Braille display. When the Smart Beetle has finished booting, "Pairing
BRL" is displayed.
To power the unit off, hold the "Power" button for 3 seconds. The Power
Down sound is heard, and "Power off" is shown on the Braille display.
Down sound is heard, and "Power off" is shown on the Braille display.
2.2 Checking Battery and Charging Status
The Smart Beetle can operate for about 20 hours on a full charge of the
built-in battery. To Charge the Smart Beetle, plug the small, flat end of
the AC adapter in to the Micro USB port on the back, and plug the larger
box-like end in to a standard AC electrical outlet. A full charge takes
approximately 4 hours.
built-in battery. To Charge the Smart Beetle, plug the small, flat end of
the AC adapter in to the Micro USB port on the back, and plug the larger
box-like end in to a standard AC electrical outlet. A full charge takes
approximately 4 hours.
To check the Smart Beetle's battery status, press "Backspace-Enter-P".
The current battery level and charging status are displayed. You can
also find the power status by opening the menu and viewing the
"Information".
The current battery level and charging status are displayed. You can
also find the power status by opening the menu and viewing the
"Information".