SAM Electronics GmbH NG3028X25KW 사용자 설명서

다운로드
페이지 144
ED 3038 G 232 / 01 (2002-06) 
Operating Instructions
13  Displays in the Multidisplay
13.4  Wind/Set+Drift Display
b_r1_e31.fm / 21.06.02
103
RADARPILOT / CHARTRADAR 
13.4
Wind/Set+Drift Display
If there is a wind sensor connected, the wind data and the set and drift caused by the current can be
displayed numerically and graphically on the Wind/Set+Drift Display.
Switching the Wind/Set+Drift Display On/Off
Click on the MENU button. Then, in the USER SETTINGS menu,
click on the WIND button.
Specifying whether the Wind is to be Displayed True or Relative
Switch-over is performed by clicking into the top right-hand area
(or R) of the Wind/Set+Drift Display.
Specifying whether the Wind Speed is to be Displayed in kt or in m/s
The switch-over is performed by clicking into the numerical field of the wind speed.
MENU
MENU
USER SETTINGS
1.DO
WIND
3.DO
2.DO
R = relative wind, T = true wind;
switch-over by clicking
Direction and speed of the current,
The values are determined from the available sensor data. If not all of the 
necessary data are available, the data displayed do not correctly represent 
the drift vector.
Example: If only the longitudinal speed through the water (from an EM log) 
and the speed vector over ground (from GPS) are available, the displayed 
set and drift values indicate the offset caused by the current and wind.
Ship symbol represents the present Gyro Heading
Yellow arrow pointing inwards: Wind direction
Blue arrow pointing outwards: Direction of the current
Red line: Actual course = Gyro Heading + drift angle
Wind direction and wind speed