Cascade Networks Inc. 5200UNII 사용자 설명서

time.

If a Canopy module is placed into Alignment Mode it will automatically drop into Operational
Mode after 15 minutes

BER Display

Bit Error Rate (BER) Display is utilized by the operator to measure the amount bit errors present in
a link. BER Display will only work if the access point module is configured to send the BER stream.

**IMPORTANT** If one access point module in a cluster is set to send a BER stream then all
other access point modules in that cluster must be configured in the same fashion.

The field, Measured Bit Error Rate, will display a value that corresponds to the BER at the moment
of web browser refresh. An acceptable link will have a BER that is less than 10

-4

. If the BER is

greater than 10

-4

then the operator needs to evaluate the subscriber and/or access point module

installation for potential issues. To refresh the screen, click the

Refresh Display

button as

appropriate or configure the web page auto-refresh option.

ACCESSORIES

The following accessories are available for use with the Canopy System. To purchase
accessories, please contact an authorized Canopy dealer, unless otherwise noted.

• Universal mounting bracket (part number SMMB-1)

• Passive reflector dishes for use with 5.7 GHz subscriber modules (part number 27RD)

• 102-132 V AC power supply with North American plug, part number ACPS110

• 100-240 V AC power supply with North American, UK, and Euro plugs, part number

ACPSSW-02

• Cable assemblies for the Canopy System can be ordered from Best-Tronics Manufacturing

Inc. by going to their website at

http://www.best-tronics.com/motorola

. Due to the RF

environment Canopy Backhauls, Access Points, and Cluster Management Modules often
operate in, it is strongly recommended to use shielded cable for infrastructure cabling