FreeWave Technologies Inc. 715712152112 사용자 설명서

다운로드
페이지 54
 Global Transceiver Module (GXM) Wireless Data Transceiver User Manual 
LUM0031AA Version 
1.0 
30 
(4)
 
G
OVERNMENT 
R
ULES
 
This section allows the user to view the government rules settings with which the transceiver is set to 
comply. 
Setting Definition 
FCC rules – Radio power output can be set to a maximum of 27 dBm (500 mW). 
ETSI 328 – Radio power output can be set to a maximum of 20 dBm (100 mW). 
 
For more information, contact FreeWave Technical Support at (303) 381-9200.  
 
(1)
 
M
AX 
P
ACKET 
S
IZE AND 
(2)
 
M
IN 
P
ACKET 
S
IZE
 
The Max and Min Packet Size settings and the RF Data Rate determine the number of bytes in the 
packets. Throughput can be enhanced when packet sizes are optimized. In Point-to-Point mode, the Max 
and Min Packet Settings will not much material impact on throughput unless a port-to-port throughput of 
115.2 KBaud is required. However, this may have an impact on latency. For example, if small amounts of 
data are sent and large packet sizes are selected, a certain amount of time “wasted” between each 
packet would be seen.   
The following 3 tables provide the information to determine optimum setting values. 
The default settings are: Max Packet Size = 8, Min Packet Size = 9, and RF Data Rate = 3. 
The following table defines the Minimum packet size in bytes by way of charting the Min Packet Size 
setting versus the RF Data Rate setting. Using the default settings, the actual minimum packet size, in 
bytes, is 44.  
Minimum Packet Size Definition 
Min 
Setting 
Min Packet Size  
RF Data Rate = 2 
Min Packet Size 
RF Data Rate = 3 
0 15 
1 21 
12 
2 26 
16 
3 31 
20 
4 37 
24 
5 42 
28 
6 47 
32 
7 53 
36 
8 58 
40 
9 63 
44 
 
 
FreeWave Technologies, Inc. 
1180 S Flatiron Ct Ste F 
Boulder, CO 80501 
(303) 381-9200