Sercel Inc 0500A 사용자 설명서
Rev 30-2015
Page 10
IMPORTANT
Prior to connecting any plug, make sure there is no water inside connectors.
Electrostatic discharge:
Use the following guidelines to provide a static-free repair station that will preclude any ESD-related
damage to electronic circuits:
• All spare parts (circuit boards and ESD sensitive devices) should be stored and transported in static-
shielding bags.
• Unless the repair station rests on a conductive floor, chairs or stools should rest on a grounded, rigid-
type, static-dissipative floor mat.
• Use a static-dissipative table mat.
• Wear a static-control wrist strap or foot grounder.
• Provide common-point grounding for all conductive items (including personnel and soldering iron tip).
• To control the discharge rate and protect workers from electric shocks, both the table mat and wrist
strap should be grounded through a 1-MΩ resistor. The mat should be connected to the same earth
ground point as the wrist strap.
• Wear static-dissipative garments.
damage to electronic circuits:
• All spare parts (circuit boards and ESD sensitive devices) should be stored and transported in static-
shielding bags.
• Unless the repair station rests on a conductive floor, chairs or stools should rest on a grounded, rigid-
type, static-dissipative floor mat.
• Use a static-dissipative table mat.
• Wear a static-control wrist strap or foot grounder.
• Provide common-point grounding for all conductive items (including personnel and soldering iron tip).
• To control the discharge rate and protect workers from electric shocks, both the table mat and wrist
strap should be grounded through a 1-MΩ resistor. The mat should be connected to the same earth
ground point as the wrist strap.
• Wear static-dissipative garments.