R F Technologies Inc ATZ24262 사용자 설명서
Chapter 3: Using the Software
50
Series 5.0 Software (0510-1059-A_DRAFT) - User Guide
Discharge
When it is time for a patient to leave your facility, he/she must be discharged from the software. If applicable, the
alarming band transmitter is removed from the patient within the period of time specified by your facility. Finally,
the transmitter must be cleaned in order to be ready to be used again.
alarming band transmitter is removed from the patient within the period of time specified by your facility. Finally,
the transmitter must be cleaned in order to be ready to be used again.
To discharge a patient or asset
1. Click Discharge on the toolbar.
2. If necessary, swipe your identification card or enter your Login and Password then press Enter or click
OK.
The Discharge window appears. Patients, assets. or alarming band transmitters that currently exist in
the census are listed in the window.
the census are listed in the window.
FIGURE 3.9: Discharge Window
3. Use the arrow buttons to find and select the patient or asset to be discharged.
4. Click Discharge.
N
OTE
: If a patient is in alarm, the event must be cleared before the patient can be
discharged.