R F Technologies Inc ATZ24262 사용자 설명서

Series 5.0 Software (0510-1059-A_DRAFT) - User Guide

 85

Event Types

Adjust Expired (White Alarm only)

This alarm occurs when the selected amount of time required for the adjustment of the banding material has 
expired and the adjustment has not been complete properly.

1.    Determine that the patient is secure.

2.    If the banding material has not yet been adjusted, click anywhere in the Adjust Expired Alarm Message 

Box to access the Event Information window.

3.    Click Clear.

4.    Perform the Adjust function again.

Begin Adjust (White Alarm only)

This alarm occurs after a configured amount of time to remind staff to check the alarming band transmitter for 
band slippage. The time for the Require band slippage check is configured in the Configuration, Units menu (refer 
to the Series 5.0 Software Administrator Guide).

1.    Determine that the patient is secure.

2.    Click anywhere in the Begin Adjust Alarm Message Box to access the Event Information window.

3.    Click Clear.

4.    If necessary, perform the Adjust function.

Admit Complete

This alarm occurs when the Admit function for a patient or asset is complete. This dialog box only appears if the 
software has been configured to confirm the Admit.The Confirm Admit is configured in the Configuration, 
Global Settings menu (refer to the Series 5.0 Software Administrator Guide).

Discharge Complete

This alarm occurs when the Discharge for a patient or asset is complete. This dialog box only appears if the 
software has been configured to confirm the discharge.The Confirm Discharge is configured in the Configuration, 
Global Settings menu (refer to the Series 5.0 Software Administrator Guide).