Microsoft Corporation RM-559 사용자 설명서

To update the device software, do the following:
1. Download and install the Nokia Software Updater application to your PC.
2. Connect your device to the PC using a USB data cable, and select PC Suite mode.
3. Open the Nokia Software Updater application. The Nokia Software Updater

application guides you to back up your files, update the software, and restore your

files.

Your device normally has MMS, GPRS, streaming, and mobile internet settings

automatically configured in the device, based on your network service provider

information. You may have settings from your service providers already installed in your

device, or you may receive or request the settings from the network service providers

as a special message.

If you forget any of the access codes, contact your service provider.
● Personal identification number (PIN) code — This code protects your SIM card against

unauthorised use. The PIN code (4 to 8 digits) is usually supplied with the SIM card.

After three consecutive incorrect PIN code entries, the code is blocked, and you need

the PUK code to unblock it.

● UPIN code — This code may be supplied with the USIM card. The USIM card is an

enhanced version of the SIM card and is supported by UMTS mobile phones.

● PIN2 code  — This code (4 to 8 digits) is supplied with some SIM cards, and is required

to access some functions in your device.

● Lock code (also known as security code) — The lock code helps you to protect your

device against unauthorised use. The preset code is 12345. You can create and

change the code, and set the device to request the code. Keep the new code secret

and in a safe place separate from your device. If you forget the code and your device

is locked, your device will require service and additional charges may apply. For more

information, contact a Nokia Care point or your device dealer.

● Personal Unblocking Key (PUK) code and PUK2 code — These codes (8 digits) are

required to change a blocked PIN code or PIN2 code, respectively. If the codes are

not supplied with the SIM card, contact the operator whose SIM card is in your device.

● UPUK code — This code (8 digits) is required to change a blocked UPIN code. If the

code is not supplied with the USIM card, contact the operator whose USIM card is in

your device.

Many features in your device increase the demand on battery power and reduce the

battery lifetime. To save battery power, note the following:

2009-07-10 19:9:15 P3987 user guide publication 1