Microsoft Corporation RM-559 사용자 설명서

To change the priority of an access point within the group, select Options >

Organise > Change priority.

Select Menu > Settings and Connectivity > Destinations > Access point, and

follow the instructions on the screen.
To edit a packet data access point, open one of the access point groups, and select an

access point marked with 

.

Follow the instructions from your service provider.
Select from the following:
● Access point name  — You obtain the access point name from your service provider.

● User name  — The user name may be needed to make a data connection, and is

usually provided by your service provider.

● Prompt password  — If you must enter the password every time you log in to a

server, or if you do not want to save your password in the device, select Yes.

● Password  — A password may be needed to make a data connection and is usually

provided by your service provider.

● Authentication  — Select Secure to always send your password encrypted or

Normal to send your password encrypted when possible.

● Homepage  — Depending on the access point you are setting up, enter the web

address or the address of the multimedia message centre.

● Use access point  — Select After confirmation if you want the device to ask for

confirmation before the connection using this access point is created, or

Automatically if you want the device to connect to the destination using this access

point automatically.

Select Options > Advanced settings and from the following:
● Network type  — Select the internet protocol type to transfer data to and from your

device. The other settings depend on the selected network type.

● Phone IP address (for IPv4 only) — Enter the IP address of your device.

● DNS addresses  — Enter the IP addresses of the primary and secondary DNS servers,

if required by your service provider. To obtain these addresses, contact your internet

service provider.

● Proxy server address  — Enter the address of the proxy server. 

● Proxy port number  — Enter the port number of the proxy server.

Select Menu > Settings and Connectivity > Destinations > Access point, and

follow the instructions.
To edit a wireless LAN (WLAN) access point, open one of the access point groups, and

select an access point marked with  . Follow the instructions from your WLAN service

provider. Select from the following:

2009-07-10 19:9:15 P3987 user guide publication 1