Actiontec Electronics Inc. SBWD960A 사용자 설명서
40
l Screensaver: Selecting this option, the system will run the screensaver after the
defined idle time expires. Users can define the idle time in the Wait time box.
Note: 5-9999 seconds are allowed.
l HDMI Off: Selecting this option, the HDMI output will be turned off after the defined idle
time expires. Users can define the idle time in the Wait time box.
Note: 5-9999 seconds are allowed.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.
5.3.10.
Setting up WiDi Lower Bandwidth
The WiDi Lower Bandwidth is used to control video quality and speed.
Follow the procedure below to set up WiDi Lower Bandwidth for the receiver:
1. Go to the Features tab page by clicking the Features tab.
2. Set WiDi Lower Bandwidth to Enable or Disable according to practical requirements.
l Enable: This will limit the bandwidth for WiDi. In a congested network, this can produce
l Enable: This will limit the bandwidth for WiDi. In a congested network, this can produce
relatively smooth video playback.
l Disable: The bandwidth for WiDi is not limited. This will produce better video quality for
video playback when working in a clean network.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.