Bendix Commercial Vehicle Systems LLC TX433TS-2 사용자 설명서
SmarTire Systems Inc.
Tire Monitoring System Reference Manual
6/13/2000 Page 35 of 55
This manual is under review by SmarTire – DO NOT ISSUE
Diagnostic Modes - Level 2
The following modes are found under the Diagnostic menu, which are accessed by holding the
SET button in Stand-By mode or Programming menu for 5 seconds. The MODE button is used
to scroll through each diagnostic mode.
•
Slope (SL)
•
Transmitter battery voltage (diagnostic function)
•
Learn mode (set tire ID)
Slope
Use this mode to change the slope value used to calculate the
required pressure for each axle in this mode.
To choose this mode press the TIRE button when “SL” is
displayed.
Press the TIRE button to select an axle.
displayed.
Press the TIRE button to select an axle.
Press the MODE button to display the current value of slope
for the selected axle.
Press TIRE and MODE buttons to increase and decrease the
value respectively. The minimum value is 10 and the
maximum is 160.
for the selected axle.
Press TIRE and MODE buttons to increase and decrease the
value respectively. The minimum value is 10 and the
maximum is 160.
Press the SET button to save the value.
Press the TIRE button to select another axle for programming.
Press the TIRE button to select another axle for programming.