Senao International Co Ltd RL30V114 사용자 설명서
11g Wireless Cardbus Adapter
Version: 1.0
Page 14 of 35
3.1.1 Infrastructure Configuration
After clicking on the Add button in Profile tab, the Configuration tab will be
displayed.
displayed.
h Profile Name: Specify a name for this profile; this can be any name
that you may associate with your network. This feature comes in handy
when you need to work at several locations where there are different
network settings. Using this you can configure a different profile for each
of your networks.
when you need to work at several locations where there are different
network settings. Using this you can configure a different profile for each
of your networks.
h SSID: Specify the SSID of the network. The SSID is a unique name
shared among all points in your wireless network. The SSID must be
identical for all points in the network, and is case-sensitive.
identical for all points in the network, and is case-sensitive.
h PSM: There are two options for PSM (Power Saving Mode). Select a
radio button for either CAM (Constantly Awake Mode) or PSM (Power
Saving Mode).
Saving Mode).
h Network Type: Select Infrastructure from the drop-down list.
h TX Power: Select a transmit power from the drop-down list.
h RTS Threshold: place a check in this box and adjust the value for the
h TX Power: Select a transmit power from the drop-down list.
h RTS Threshold: place a check in this box and adjust the value for the
RTS threshold. Any packet in the RTS/CTS handshake larger than the
specified size will be discarded. It is recommended to leave this value at
its max.
specified size will be discarded. It is recommended to leave this value at
its max.
h Fragment Threshold: place a check in this box and adjust the value for
the fragment threshold. It is recommended to leave this value at its max.