Wistron NeWeb Corporation XRAGP3 사용자 설명서

다운로드
페이지 32
2 Software                           
                    Second Generation RFID Smart Reader
 
                                                   
17
 
 
Management: Ethernet 
LAN Settings 
 
 
You can configure the local network settings of the Reader on this page.   
 
Host Name: Host name of the Reader. 
 
IP Address: Enter the local network IP address for the Reader. The IP address is also the 
one that you enter when logging in to 
this Web UI. The default IP address is “192.168.0.1”. 
Note: It is strongly suggested that you use the default address for the LAN port at all times 
so that one can easily access the Reader. 
 
Subnet Mask: The subnet mask along with the previously configured IP address defines 
the network. The default value for the 
subnet mask is “255.255.255.0”. 
 
DHCP  Start  IP:  Define  the  starting  value  of  the  IP  addresses  to  be  given  to  LAN  users 
connecting to the Reader   
 
DHCP End IP: Define the last value of the IP address to be given to LAN users connecting 
to the Reader. 
 
Lease Time: In Lease Time you can specify a period of  time after which  an assigned IP 
address  will  be  retrieved  from  devices  due  to  the  fact  that  there  has  been  no  network 
activity during the specified time.