Netronix Inc W423B 사용자 설명서

SSID: AP name of user type. User also can select [Use Mac Address] to display it.

1. Wireless Mode: Select wireless mode. 802.11 B/G mix, 802.11B only, 802.11A only,

802.11G only, 802.11 B/G/N mix and 802.11 A/N mix mode are supported. When wireless

card is 802.11N, system default is 802.11 B/G/N mix; Otherwise system default is 802.11
B/G mix (802.11 B/G/N mix selection item only exists for B/G/N adapter).

2. Wireless Protection: Auto, on, and off. System default is auto.

a. Auto: STA will dynamically change as AP announcement.

b. On: Always send frame with protection.

c. Off: Always send frame without protection.

3. Beacon (ms): The time between two beacons. System default is 100 ms.

4. TX Power: Manually force the AP transmits power. System default is 100%.

5. TX Rate: Manually force the Transmit using selected rate. Default is auto.

6. Idle Time: Manually force the Idle Time using selected value. Default is 300.

7. Channel: Manually force the AP using the channel. System default is channel 1.

8. Use Mac Address: Use MAC address of used wireless card to be AP name. System default is

APX (X is last number of Mac Address).

9. Security Setting: Authentication mode and encryption algorithm used within the AP. System

default is no authentication and encryption.

10. No forwarding among wireless clients: No beacon among wireless client, clients can

share information each other. System default is no forwarding.

11. Hide SSID: Prevent this AP from recognized in wireless network. This is disabled as default.

12. Allow BW40 MHz: Allow BW40 MHz capability.

13. Default: Use system default value.

14. Apply: Apply the above changes.