Zebra Technologies Corporation TFF-1015-0001 사용자 설명서
WhereNet Corp January 2003
Page 7
Tag Installation and Activation
Tags are shipped with all radio emitters deactivated. Prior to installing a tag on an item to be tracked, the tag must be
activated. This is done using the WhereNet’s WhereWand. The WhereWand is used to configure and activate the tag, and
to confirm that the tag is properly configured and operational. The detailed procedure for tag activation is covered in
WhereWand User’s Manual
activated. This is done using the WhereNet’s WhereWand. The WhereWand is used to configure and activate the tag, and
to confirm that the tag is properly configured and operational. The detailed procedure for tag activation is covered in
WhereWand User’s Manual
.
Tag Mounting Options
Introduction
The WhereTag II device has a variety of ways to be mounted depending on the user’s needs. The following mounting
methods can be used:
methods can be used:
Built-in mounting ears for screws, rivets (ears are removable).
Tie wrap
Poly-lock
Adhesive tape
Vehicle rearview mirror mount
Trailer and ISO container mounts
Tie wrap
Poly-lock
Adhesive tape
Vehicle rearview mirror mount
Trailer and ISO container mounts