NBS Payment Solutions - Division of NBS Technologies Inc. NBS7250 사용자 설명서
NBS Payment Solutions
6/8
User Manual
NBS7250 installation manual
Safety instructions lithium battery :
NBS7250 equipment is equipped with a lithium battery which is non-accessible for the user. Only a qualified operator is
authorized to open the unit and to replace this component.
NBS7250 equipment is equipped with a lithium battery which is non-accessible for the user. Only a qualified operator is
authorized to open the unit and to replace this component.
Keypad
Inserting, sliding or presenting
the cards
Installing the Shield (option)
UP Arrow key
Down Arrow key
Function
Key
Cancel
Key
Delete
Key
Enter
Key
Physical characteristics :
Weight (without cable)
240g
Dimensions
165
x
95
max
x
45mm
(LxWxH)
Removable
cable
Operating conditions :
Temperature
+5°C
to
+45°C
Maximum relative humidity
85% RH to +55°C
Storage conditions :
Temperature
-20°C
to
+55°C
Maximum relative humidity
85% RH à +55°C
Consumption :
180mA
@
+12V
280 mA @ +8V
350 mA @ +5V
Fixing of the base :
Maintain
the product on its base :
The base can be fixed by
three screws.
Two choices are possible, the
holes (A) or (b) indicated on
the drawing opposite.
The base can be used as
gauges of pointing on the
holes of the screws and for
the openings of connectors.
three screws.
Two choices are possible, the
holes (A) or (b) indicated on
the drawing opposite.
The base can be used as
gauges of pointing on the
holes of the screws and for
the openings of connectors.
NBS7250 is maintained by a notch situated on its front side
and two clips on the back side. In order to install it on its
base, first introduce the front side of the equipment and
then, make a press on its back side until hearing the locking
noise . In order to remove it from the base, remove the two
clips one after the other while pulling up the equipment
and two clips on the back side. In order to install it on its
base, first introduce the front side of the equipment and
then, make a press on its back side until hearing the locking
noise . In order to remove it from the base, remove the two
clips one after the other while pulling up the equipment
Y
X