Humax T9 사용자 설명서
Confidential
DUT Graphical User Interface
DUT Tool Package
Introduction
User’s Guide
8
Revision 1.1, 2013-05-06
1
Introduction
1.1
Purpose
This user guide explains how to use the DUT GUI application. The application is used for hardware development
purposes and evaluations based on Lantiq's WiFi MIMO technology.
purposes and evaluations based on Lantiq's WiFi MIMO technology.
1.2
About the Test Driver and the DUT GUI Application
The DUT GUI is an application used to help hardware and RF designers test and verify the behavior of their design
based on Lantiq's WiFi solution.
DUT GUI uses a specially designed test driver with the firmware that uses all HW and PHY level algorithms. The
driver also allows transmission and receiving without the limitations of the IEEE 802.11n standard
based on Lantiq's WiFi solution.
DUT GUI uses a specially designed test driver with the firmware that uses all HW and PHY level algorithms. The
driver also allows transmission and receiving without the limitations of the IEEE 802.11n standard
The DUT GUI includes an API to control the WiFi functionality (mt_dut.dll). The API can be used to control the DUT
(Device Under Test) from an external application.
Together with wireless LAN test equipment maker LitePoint, Lantiq have integrated this dll into LitePoint's IQFact
Design Verification Test (DVT) software. IQFact is a comprehensive set of WiFi physical layer transmitter and
receiver tests utilizing a large set of channels, data rates and channel bandwidths. The tool allows you to verify
assembly in the production line with a vast test coverage in a short test time
(Device Under Test) from an external application.
Together with wireless LAN test equipment maker LitePoint, Lantiq have integrated this dll into LitePoint's IQFact
Design Verification Test (DVT) software. IQFact is a comprehensive set of WiFi physical layer transmitter and
receiver tests utilizing a large set of channels, data rates and channel bandwidths. The tool allows you to verify
assembly in the production line with a vast test coverage in a short test time
1.3
Content of the Installation Kit
The installation package for the DUT GUI installs the following items onto your computer:
•
•
DUT GUI Core
•
ActivePerl application - Perl interpreter (used for TCP/IP mode)
•
Release Notes
•
User’s Guide (= this document)
Note: Contact Lantiq for the latest application version and installation instructions.
1.4
Supported Interfaces
The DUT GUI application allows you to control the WiFi chipset through the following interface:
•
•
TCP/IP - Control the chipset when it is assembled on a Linux based host. In order for the DUT GUI to work,
the host should contain operational driver firmware. The following Host and Linux versions are supported:
the host should contain operational driver firmware. The following Host and Linux versions are supported:
•
Lantiq's Universal Gateway (UGW) software
1.5
x86 PC Linux Host Requirements
The DUT system provides following requirements to the x86 Linux host in order to operate properly:
1. Microsoft® Windows® XP SP 3.0 and .NET Framework 2.0 (min. requirement)
2. Support for Microsoft® Windows® 7, 32/64 bit
3. OS login/password required is root/wlan
4. This may be changed by editing the linux_hosts.txt file in the DUT's installation directory, with a new
1. Microsoft® Windows® XP SP 3.0 and .NET Framework 2.0 (min. requirement)
2. Support for Microsoft® Windows® 7, 32/64 bit
3. OS login/password required is root/wlan
4. This may be changed by editing the linux_hosts.txt file in the DUT's installation directory, with a new
username/password to be specified in its [PC] section.
5. Tftp client package must be installed.