Honeywell International Inc. VM3WLANA 사용자 설명서

Important – The settings for Auth Type, EAP Type and Encryption depend on the security type chosen. 

Scan

Opens a window that lists access points that are broadcasting their SSIDs. Tap the Refresh button to 
view an updated list of APs. Each AP’s SSID, its received signal strength indication (RSSI) and whether 
or not data encryption is in use (true or false). Sort the list by tapping on the column headers.
If the scan finds more than one AP with the same SSID, the list displays the AP with the strongest RSSI 
and the least security.

If you are logged in as an Admin, tap an SSID in the list and tap the Configure button, you return to the 
Profile window to recreate a profile for that SSID, with the profile name being the same as the SSID (or 
the SSID with a suffix such as “_1” if a profile with the SSID as its name exists already).

WEP Keys / 
PSK Keys

Allows entry of WEP keys or pass phrase as required by the type of encryption.

Edit Profile

Default

A string of 1 to 32 alphanumeric characters, establishes the name of the Profile. 
Options are Default or ThirdPartyConfig.

SSID

Blank

A string of up to 32 alphanumeric characters. Establishes the Service Set Iden-
tifier (SSID) of the WLAN to which the client connects. 

Client Name

Blank

A string of up to 16 characters. The client name is assigned to the network card 
and the device using the network card. The client name may be passed to net-
working wireless devices, e.g. Access Points.

Power Save

CAM

Power save mode.
Options are: Constantly Awake Mode (CAM) power save off, Maximum (power 
saving mode) and Fast (power saving mode). When using power management, 
use FAST for best throughput results.

Tx Power

Maximum

Maximum setting regulates Tx power to the Max power setting for the current 
regulatory domain. 
Options are: Maximum, 50mW, 30mW, 20mW, 10mW, 5mW, or 1mW.

Bit Rate

Auto

Setting the rate to Auto will allow the Access Point to automatically negotiate the 
bit rate with the client device. 
Options are: Auto, 1 Mbit, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 or 54 Mbit.

Auth Type

Open

802.11 authentication type used when associating with the Access Point. 
Options are: Open, LEAP, or Shared key.

EAP Type

None

Extensible Authentication Protocol (EAP) type used for 802.1x authentication to 
the Access Point. 
Options are: None, LEAP, EAP-FAST, PEAP-MSCHAP, PEAP-GTC, PEAP-
TLS, EAP-TTLS, or EAP-TLS. 
EAP Type chosen determines whether the Credentials button is active and also 
determines the available entries in the Credentials pop-up window.