Honeywell International Inc. 760004 사용자 설명서
3 - 14
Installing Memory Cards
This terminal supports microSD and microSDHC memory cards up to 4GB.
. Access door removal requires a Torx 5 (T5).
1.
Press the Blue
+
Backlight
2.
Place the terminal on a flat, secure surface with the keyboard face-down.
3.
Use a T5 screwdriver to remove the screw on the micro-SD door.
4.
Remove the access door.
5.
Slide the micro-SD card in with the contacts facing up (away from the keyboard) and the flat, straight
edge parallel to the top panel (with the imager).
edge parallel to the top panel (with the imager).
Note:
To remove an installed SD card while the access door is open, tap on the edge lightly to unlock
the card; the card will pop out just enough for you to grab its edge and pull it out.
the card; the card will pop out just enough for you to grab its edge and pull it out.