Honeywell International Inc. 760004 사용자 설명서

다운로드
페이지 136
3 - 24
Internal Backup Battery
Located inside the terminal, the backup battery is a 2.4V nickel metal hydride (NiMH) battery.
The internal backup battery prevents the terminal from being reset when you remove the main battery 
pack. This battery retains RAM data and allows the real-time clock to remain operational for up to 30 
minutes. If the terminal is left without the main battery pack for more than 30 minutes, the internal backup 
battery discharges and needs to be recharged to function according to specifications. 
Note: Even if the internal backup battery fails, data and programs stored in Flash memory (IPSM) or an optional SD 
card are not lost. However, the terminal automatically cold boots when you install a fully charged battery pack 
and you need to reset the real-time clock.
Charging
The internal backup battery charges off the main battery pack and requires eight hours charge time to 
backup RAM data for 30 minutes. You can begin using the Dolphin terminal after charging the main 
battery for four hours; however, the internal backup battery will continue to charge off the main battery. 
To ensure that the internal backup battery functions properly, maintain a consistent power supply for the 
first eight hours of terminal operation. This power supply can be external power (using a charging 
peripheral) or an installed, charged battery pack or a combination of both.
Guidelines 
Follow these guidelines to maximize the life of the Dolphin’s internal backup battery:
• Keep a charged Li-ion battery pack in the Dolphin terminal. 
• Keep the Dolphin terminal connected to a power source when the terminal is not in use. 
Checking Battery Power
Tap Start > Settings > System tab > Power