Xmark Corporation PT2 사용자 설명서
EXI HALO User Manual
980-000002-000
EXI Wireless Systems Inc.
6
December 2000
Revision 6.0
-
Names of dialog boxes, screens, and field titles in forms are bolded or
shown graphically.
-
Names of buttons are shown as on screen.
1.3. Computer Display Conventions
The computer displays various types of information, which is color-coded, to differentiate between the
Supervisor and User modes. In addition, the “Icons” that display the locations of the various system
components such as the Controllers and the Receivers, and the on-screen “buttons” may also change
color to indicate their status.
Supervisor and User modes. In addition, the “Icons” that display the locations of the various system
components such as the Controllers and the Receivers, and the on-screen “buttons” may also change
color to indicate their status.
The table below shows the various icons, and alarm conditions.
Icon
Name
Description
Controllers
The controllers are located near egress points, such
as doors. This icon will flash red if there is a
communication problem.
as doors. This icon will flash red if there is a
communication problem.
Receivers
Receivers can be placed anywhere, and will only
detect off-body TIC alarms.
detect off-body TIC alarms.
Elevators
Elevators are controllers which detect TIC or TIF
alarms near an elevator.
alarms near an elevator.
Console
The console is the computer that runs the HALO™
software.
software.
Pre-alarm
Alarm Condition
Controllers or Receivers will flash these two icons
when they receive a TIC, a TIF, or a loiter alarm.
when they receive a TIC, a TIF, or a loiter alarm.