Accton Technology WM1212M 사용자 설명서
(Continued from the other side of this guide.)
2. The Windows installation wizard starts. Click the
Install button.
3. When a window displays to confirm the Wireless
Tools software installation, click Yes.
4. Wait while the Wireless Tools software is installed.
5. When the Wireless Tools software installation is
complete, the following message displays:
Click OK.
6. When a window displays to confirm the driver
software installation, click Yes..
7. Wait while the driver software is installed, then click
OK when the completed download message displays.
Then click Finish to close the wizard.
Then click Finish to close the wizard.
Software installation is now complete. Continue with the
instructions on setting up the Wi-Fi network connection
on your mobile device.
instructions on setting up the Wi-Fi network connection
on your mobile device.
Configuring the SDIO Card
When the SDIO WLAN 802.11b/g Card software is
installed on your mobile device, you need to insert the
SDIO card into the slot to configure your network
connection.
installed on your mobile device, you need to insert the
SDIO card into the slot to configure your network
connection.
Note: If the SDIO WLAN 802.11b/g Card is already in
the SDIO slot, you need to remove it then insert again to
initialize the software driver.
the SDIO slot, you need to remove it then insert again to
initialize the software driver.
The following example shows the SDIO WLAN
802.11b/g Card network configuration for Pocket PC
2003. The set up procedure is similar for Windows
Mobile 5.0.
802.11b/g Card network configuration for Pocket PC
2003. The set up procedure is similar for Windows
Mobile 5.0.
Follow these steps:
1. The SDIO WLAN
802.11b/g Card software
should start automatically
when it is first inserted. If
it does not start, you can
find the SDIO Wireless
Tools program and start it
manually.
should start automatically
when it is first inserted. If
it does not start, you can
find the SDIO Wireless
Tools program and start it
manually.
2. The Site Survey screen
shows Wi-Fi networks
within range. Select
Refresh to scan for
available networks. Select
Config to set up a network
connection
within range. Select
Refresh to scan for
available networks. Select
Config to set up a network
connection
Normally, you need to be
within 25 m (82 ft) of a
wireless access point to
be able to connect to it. If
the network you want to
connect to is not on the
list, move to another
location and try again.
within 25 m (82 ft) of a
wireless access point to
be able to connect to it. If
the network you want to
connect to is not on the
list, move to another
location and try again.
3. From the Configure
Wireless Networks
screen, select a network
name from the list, or “Add
New...” to specify a new
network name.
screen, select a network
name from the list, or “Add
New...” to specify a new
network name.
4. Under General network
configuration, select OK
to connect to the wireless
network.
to connect to the wireless
network.
5. If the wireless network is not “Open” and uses
security, select the Network Key tab. Contact the
wireless network operator for the security settings
required for network access.
wireless network operator for the security settings
required for network access.
Note: All wireless networks that are configured on the
mobile device are saved as “preferred networks.” The
mobile device will automatically try to connect to
preferred networks when detected.
mobile device are saved as “preferred networks.” The
mobile device will automatically try to connect to
preferred networks when detected.
For more information on installing the SDIO WLAN
802.11b/g Card, refer to the Installation Guide, which is
on the Installation Software CD included in the package.
802.11b/g Card, refer to the Installation Guide, which is
on the Installation Software CD included in the package.