Unitech Electronics Co. Ltd. HT580 사용자 설명서
Unitech Part Number: 400412
4
1. Setting
Setting menu do 2 major functions – User mode setting and Supervisor setting. In HT580L User
Guide, it already explains user mode operation. This document will also repeat it again from below
section.
Note : Due to no barcode scanning requirement on Setting menu, SCAN key will also be
treated as ENTER key during Setting operation. So, user can use below 2 ways to select any
Setting item
Guide, it already explains user mode operation. This document will also repeat it again from below
section.
Note : Due to no barcode scanning requirement on Setting menu, SCAN key will also be
treated as ENTER key during Setting operation. So, user can use below 2 ways to select any
Setting item
Press MENU key to move cursor to target item and then press SCAN(or ENTER) key
Direct press item number (without combining with ENTER) to enter setting item
After pressing “1” key from main screen, there are four setting options which include the following:
1. DATE & TIME
2. DEVICE
3. MODEM
4. SUPERVISOR
2. DEVICE
3. MODEM
4. SUPERVISOR
1.1. DATE & TIME
Press “1” (or press “MENU” key to move cursor to item 1) to enter DATE & TIME category so that you are
able to set the correct date and time. The page will appear as it is shown below:
able to set the correct date and time. The page will appear as it is shown below:
Press numeric keys to input correct date & time. Once complete, press [ENTER] to save the revised
settings. To go back to previous menu, press [
settings. To go back to previous menu, press [
ESC
].
YYYY-MM-DD
2000-01-08
HH-MM-SS
05:50:35
2000-01-08
HH-MM-SS
05:50:35