Unitech Electronics Co. Ltd. MT18MIFARE01 사용자 설명서
Chapter 4
Advanced Setting
21
4.
Right-click All Groups, and click Append
o
Group to add a new controller group. The Con-
troller Group Management window appears.
5.
Enter the controller group name (for example, DEMO). Click Apply, and then OK to return to
the Controller Group Management window.
the Controller Group Management window.
6.
Right-click the desired group (for example, DEMO), and click Append
o
Entity to add a new
controller. The Controller Management screen appears.
7.
Enter the controller name (for example, No.1) in the ContorllerName field.
8.
Input MT180’s IP address (for example, 192.168.110.230) in the IPHost field. Click Apply.
9.
Click Reset to reset data in this controller. A window appears, asking to reset. Click Yes. MT180
screen displays messages Please wait! EraseFingerInfo., Please wait! Erase Log... and
Please wait! EraseCardInfo. MT180 returns to the standby screen when the reset process is
complete.
screen displays messages Please wait! EraseFingerInfo., Please wait! Erase Log... and
Please wait! EraseCardInfo. MT180 returns to the standby screen when the reset process is
complete.
NOTE:
Alternatively, reset data under the SysSet2 tab in MTTool. In the Delete all field, select
to delete all cards, logs, fingerprints, and click Delete. In the Shift Setting field, click
Clear All and then Set.
to delete all cards, logs, fingerprints, and click Delete. In the Shift Setting field, click
Clear All and then Set.
10. Click OK to return to the Controller Group Management window.
11. Click User(U)
11. Click User(U)
o
User Management.
12. Right-click All Groups, and click Append
o
Group to add a new user group. The User Group
Setting window appears.