Honeywell International Inc. RTU-K12 사용자 설명서
Page 16
Power OUTs
When the cables go out-of-doors is mandatory to use shielded cables. The
cables’ shielding must be connected to the respective ground connectors
(GND).
cables’ shielding must be connected to the respective ground connectors
(GND).
For internal wiring without shielded cables is recommended an electrical
environment where the cables are well separated, even at short runs,
especially to the power cables or external cables which can be essentially
subjected to interference or lighting.
environment where the cables are well separated, even at short runs,
especially to the power cables or external cables which can be essentially
subjected to interference or lighting.
Resistive load
+12V
OUT1-
+12V
OUT2-
max 1,2A
max 1,2A
12VDC / GND
Figure 11: Connecting to resistive loads
Inductive load
+12V
OUT1-
max 1,2A (5A impulse)
1N4004
+12V
OUT2-
max 1,2A (5A impulse)
1N4004
12VDC / GND
Figure 12: Connecting to inductive loads