Murata Electronics North America 2410G 사용자 설명서

cp <arg>

Selects the COM port to use

br <arg>

Selects the baud rate to use

do

Asserts DTR

df

De-asserts DTR

ro

Asserts RTS

rf

De-asserts RTS

cm

Sends configuration escape sequence

oo

Obey CTS/RTS

of

Do not obey CTS/RTS

sc <cmd(arg)>

Send WIT910 format configuration command

wt <arg>

Pause for arg milliseconds

An example script file is shown below:

br 115200
df
wt 200
do
wt 200
cm
wt 200
sc m!

This script file sets the baud rate of the PC COM that WinCOM is using to 115,200 kbps,
de-asserts DTR, waits 200 milliseconds, asserts DTR, waits 200 milliseconds, sends the
configuration mode escape sequence, waits 200 milliseconds and then sends the m!
command to the radio. What this script file does is set the PC COM port baud rate to
115.2 kbps, puts the radio in config mode and the issues the command to display all of
the radio parameters that have been changed from factory default. Note that this script
file leaves the radio in config mode. Cycling power or toggling DTR will return the radio
to data mode.

WinCOM prompts you to select the desired .wcr file. Opening the script file causes it to
executed immediately.

The seventh tool allows the loading of a data file for transmission. Navigate to a file then
click Open and the file is transmitted immediately.