Murata Electronics North America HN1510 사용자 설명서

iii 

M-2410-0003 Rev. B 

 

 

products, may exceed FCC mandated RF exposure limits.  FCC rules require 
professional installation of these antennas in such a way that the general public will not 
be closer than 2 m from the radiating aperture of any of these antennas.  End users of 
these systems must also be informed that RF exposure limits may be exceeded if 
personnel come closer than 2 m to the apertures of any of these antennas. 
 
•  Notice to users/installers using the following mobile antennas, with Cirronet RF 

The field strength radiated by any one of these antennas, when connected to Cirronet RF 
products, may exceed FCC mandated RF exposure limits. FCC rules require professional 
installation of these antennas in such a way that the general public will not be closer than 
20 cm from the radiating aperture of any of these antennas. End users of these systems 
must also be informed that RF exposure limits may be exceeded if personnel come closer 
than 20 cm to the apertures of any of these antennas.  
 

This device complies with ETS 300.328 of the European Community. Operation is 
subject to the following conditions: 

•  This device may not cause interference. 
•  This device must accept interference, including undesired interference that may 

impede the operation of this device. 

End of Regulatory Information 

Cirronet does not recommend field repairs of the radio equipment.  Surface 
Mount Technology (SMT) has been used in the production of the transceiver 
module, which requires specialized training and equipment for proper 
servicing. The equipment should be returned to the factory for any repair. 

 
Steps have been taken to insure the accuracy of the contents of this manual. Nevertheless, 
Cirronet Incorporated cannot guarantee the accuracy of this manual. 

WaveBolt

 is a trademark of Cirronet Incorporated. Windows is a registered 

trademark of Microsoft Corporation.