Wacom DTF-521 사용자 설명서

 14  

 

* Depending on the specifications and settings of your computer and video  

card, when in standby and suspend modes, the power lamp may only light  
up orange.

This  product  is  in  compliance  with  VESA  and  ENERGY  STAR  power-saving  guidelines.  When 

connected to a Display Power Management (DPMS)-compatible computer and graphics board, the 

power savings indicated below are automatically realized during times of  non-operation.

Computer 

Activity

Horizontal 

Synchronizing 
Signal

Vertical 

Synchronizing 
Signal

Picture 

Signal

Power 

Consumption

Power Lamp

Turned On

Yes

Yes

Yes

23W or less

Blue

Stand-by Mode No

Yes

No

Less than 2W 

Orange/Blue*

Suspend Mode Yes

No

No

Less than 2W 

Orange/Blue*

Off Mode

No

No

No

Less than 1W 

Orange

  The DTF-521 Power Saving Function

In  order  to  ensure  optimal  display  image  quality,  this  product  utilizes  the  Auto-Adjust  function. 

When  the  Auto-Adjust  function  is  operating,  it  may  take  a  short  time  before  the  screen  displays 

properly. The settings initiated by Auto-Adjust are saved in the display.

  If the Auto-Adjust function is operating, the horizontal and vertical positions as 

well as the phase and pitch of the display are adjusted automatically when the 

display mode is received. The Auto-Adjust function becomes operational when 

the horizontal frequency is in the 30-56.5KHz and the vertical frequency is in the 

45-75Hz range.(When resolution is 1024 × 768 dot (XGA), vertical frequency is in 

the 45-70Hz range)

  When  the  Auto-Adjust  function  is  operating,  only  the  power  switch  is 

operational. 

  The Auto-Adjust Function