Wacom DTF-521 사용자 설명서

The Pen and Side Switch do not Operate Correctly (For Both Windows and Macintosh)

Condition

The pen nib produces a click even

when only very lightly coming in

contact with the screen.

The pen does not produce a click

unless excessive pressure is used.

The pen nib produces a click prior

to coming into contact with the

screen.

The pen nib do not work.

The pen cannot be double-clicked

using the pen nib.

The pressure function cannot be

used.

What to Do

Use the control panel to set the pen nib sensitivity to Firm

setting.

Use the control panel to set the pen nib sensitivity to Soft

setting.

Use the control panel to set the pen nib sensitivity to Firm

setting.

When the status lamp turns blue in response to the pen nib

being moved to close proximity to the screen, either the pen or

the tablet is probably defective.

Please verify that the status lamp turns blue when the pen nib

and side switch are pushed. If the lamp doesn’t change colours,
this probably indicates that either the pen or the tablet is
probably defective.

If possible, quickly click in the same area.

In the control panel, set the double-clicking interval to a longer

setting and set the pen nib sensitivity to a lighter setting.

Verify that the double-click speed setting is not too fast in the

regular mouse control panel.

Please refer to your software application and the store where

you bought the application to verify whether it is pressure

function-enabled. Some applications have special settings that

must be established before the pressure function becomes

operational.

The tablet driver probably is not installed properly. Try re-

installing it.

Reference

P.22

P.6

ー

P.22

ー

P.12

Condition

When a replacement computer is

purchased or new software is used,
the tablet cannot be used.

The tablet, which is connected to a

USB hub, doesn’t respond.

What to Do

Installing the newest version of tablet driver may resolve this

problem. The newest tablet driver can be downloaded from
the Wacom homepage.

>http://tablet.wacom.co.jp/
Some USB hubs cannot recognize tablets. Connect the tablet

directly to the computer’s USB port.

Reference

ー

General Troubleshooting