Proxim Wireless Corporation A13QBF 사용자 설명서

Command Line Interface (CLI)

107

Maintain Client Connections using Link Integrity

[Device Name]>show linkinttbl (this shows the current links)

[Device Name]>set linkinttbl <1-5

(depending on what table row you wish to address)>

ipaddr <ip address of the host computer you want to check>

[Device Name]>set linkintpollint <the interval between link integrity checks>

[Device Name]>set linkintpollretx <number of times to retransmit before considering

the link down>

[Device Name]>set linkintstatus enable

[Device Name]>show linkinttbl (confirm new settings)

[Device Name]>reboot 0

Change your Wireless Interface Settings

See

for information on the parameters listed below.

Autochannel Select (ACS)

ACS is enabled by default. Reboot after disabling or enabling ACS.

[Device Name]>set wif 3 autochannel <enable/disable>

[Device Name]>reboot 0

Enable 2X Turbo Mode (AP-600a Only)

[Device Name]>set wif 3 turbo <enable/disable>

[Device Name]>reboot 0

Enable/Disable Interference Robustness (AP-600b Only)

[Device Name]>set wif 3 interrobust <enable/disable>

Enable/Disable Closed System (AP-600b Only)

[Device Name]>set wif 3 closedsys <enable/disable>

127(

When disabled, a client configured with the Network Name “ANY” can connect to the AP-600b. This feature is
not currently available for the AP-600a.

Enable/Disable Load Balancing (AP-600b Only)

[Device Name]>set wif 3 ldbalance <enable/disable>

Enable/Disable Medium Density Distribution (AP-600b Only)

[Device Name]>set wif 3 meddendistrib <enable/disable>